The success of any home improvement project has much to do with using the right tools. This is especially true when you want to remove texture from your ceiling. You need to have specific tools to remove popcorn ceiling easily. So, if you are looking for the best tool to remove a popcorn ceiling, this article will be more than what you need.
The Best Tool To Remove Popcorn Ceiling: POPEEZE
One of the more updated tools to use in removing popcorn ceiling is a product called Popeeze Popcorn Ceiling Scraper that has a vacuum attachment tool. It is basically a tool that removes ceiling texture without any bag or any mess at all. The product makes popcorn removal safer, cleaner and more efficient.
The product comes with one funnel and three blades. To use the product, attach the POPeeze to your regular shop vacuum hose along with a pole so you make popcorn removal easier. When you scrape off the ceiling texture, you will not have to worry about the debris falling to the floor and you do not need to worry about replacing bags every minute or so. Take note, however, that Popeeze is not recommended when taking off popcorn ceilings that have been painted over. So, be sure to check your ceiling.
Other Updated Tools To Remove Popcorn Ceiling
Aside from vacuum attachments, there are other updated tools that make your life easier when removing popcorn ceiling. First up, try using the EZ Strip Professional Strength Popcorn Ceiling Remover. This is DIY friendly and dust-free. This coating removes painted popcorn ceilings, textured drywall ceilings or textured drywall walls, multi-layered paint, and scoured wallpaper safely from drywall, wood, metal, concrete and other surfaces. The product does not have toxic fumes and does not require special ventilation so it is safe to use indoors at any day in a year.
Another tool is the Homax 12-inch Ceiling Scraper. This product remove Popcorn Ceiling textures and acoustic ceiling texture fast. It is more than possible to remove texture from a 10”x10” area within 30 minutes. Its wide blade covers a lot of ground making it a great tool for both pros and DIYers. You use the scraper with an extender.
The Best Traditional Tools for Popcorn Ceiling Removal
Even with updated and enhanced tools, one cannot do away with the traditional tools in all things home projects. For popcorn removal, there are the conventional tools that you can always trust like the sprayer, scraper, drywall joint compound and putty knife, sander, paint and roller, light, and a fan.
The sprayer you need is the usual garden sprayer that you use with some fabric softener. The scraper you need should be within 6 to 10 inches. A drywall knife is good but you need that Homax popcorn scraper tool to make things easier. The drywall joint compound is also called mud and you use your scraper as a putty knife.
The kind of sander you need is a drywall pole sander. There are those kinds of sanders that have a pivot and a pole so you can sand the ceiling while standing on the floor. The paint and roller are needed once all texture is taken off. You need enough paint for two coats. Finally, the light and fan are helpful for some extra light that points to the ceiling while you work. The fan, on the other hand, can help makes things dry in between your tasks.
A DIY Popcorn Ceiling Removal Tool
Instructables gives some really great advice as to building your own tool for Popcorn Ceiling remover. To build this tool, you will need some duct tape, a drywall taping knife, a ShopVac, a 12-14” x 2 ½” nozzle ShopVac, extension tube or wand, and ShopVac filter.
To build the tool, first, attach the extension wand or tube to the nozzle by pressing these two together. Next, tape a wood scraper to the assembly, so you can adjust the angle of the knife. Next, tape the knife handle to the entire assembly. What you need to be specific about is to have the knife edge approximately at the center of the nozzle that opens in both directions. Next, tape the blade down as close as you can to the nozzle to prevent the knife from trying to twist or move. Be careful not to make the tape too tight to prevent the blade from bowing. This can cause problems later on.
Whatever tools you have on hand, good old determination and patience is needed when faced with a popcorn removal task. And since things get naturally messy and nitty-gritty, you will surely need all the help you can get, too.